www.MSruns.com read only forum (Jan.15,2018)

I just now found this thread and you have used the exact fuel system that I am going to use on my 450 KTM. If you have any more information on set up that would be great. I thought about doing the same timing tooth set up as you but it looks like I may be able to use the stator signal as my speed a...

I just had my bike on the dyno Wednesday... I thought I had it set up pretty close but there are some areas that are very hard to data log that were off quite a bit. Being able to stand next to the bike and make changes live while on the dyno is freaking awesome. So much easier to set up VE tables. ...

http://www.thumpertalk.com/forum/showpo ... tcount=518

I tried a little VELive on VETable2, and it started to lean out some more, but when I burn in TunerStudio it stalls the engine, so I was becoming aware of the hot start cranking times. Yeah, I give my bike a bit of a rev before I burn so I don't hammer my battery to death when making changes. I had...

That's basically double the prime pulse and double the cranking pulse. The prime really shouldn't be used for enrichment but in your scenario I bet it's contributing at least somewhat to the faster start-up on the second try. Are you sure your fuel system is seep free? if air is getting into your pr...

I never expected to get to dyno testing this quickly. My goal was to learn something about FI tuning by getting the bike to run the best I could with the seat-o-the-pants dyno first. I have already well exceeded the FCR-MX carb's results and I worked on that thing for months getting it to where it w...

My big thumper's wasted spark MAP signal is scary... think Texas chain saw massacre. :lol: After seeing that, when I first got the bike running on µs ignition only, I didn't even bother putting any time into an SD fuel table. Once I get VR2 to play ball with me I'll give a blended Alpha-N/SD tune a...

A GoPro Hero. It's a very cool little camera with many mounting options and is in a waterproof enclosure.

http://www.goprocamera.com/

I set up secondary fuel today.... I went for more TPS resolution (30x16). I'm running pure Alpha-N until the VR2 gremlin gets handled. Still not finished :RTFM: ... Probably never will be. :lol: I extroplated from the single VE table into two tables in additive. VE1 is 1 to 35% TPS VE2 35 to 100%. I...

Yeah, I kept whacking my required fuel down to get the lowest bin above 25... I have still ended up with idle down at 22 after lots of VE tuning. I may go ahead and whittle away at required fuel again to get the VE numbers back up around 30. I really need the resolution down there on my big thumper....