I read on the post of many ways for the 36-1 trigger pulley
So how did you do yours if I don't have to reinvent it would save me some time
I also Seen on page 14 shows that there is two inputs for bank 1 and two for bank 2 so do I wire it as three and three per side?
thanks for all your help
Chuck
Search found 4 matches
- Mon Jun 05, 2017 4:18 pm
- Forum: Jaguar, MGB, Triumph, Rover, Lotus, etc.
- Topic: Philip Lochner 1980 Jaguar XJS V12 5.3L (10:1 CR)
- Replies: 26
- Views: 116282
- Fri Jun 02, 2017 1:38 pm
- Forum: Jaguar, MGB, Triumph, Rover, Lotus, etc.
- Topic: Philip Lochner 1980 Jaguar XJS V12 5.3L (10:1 CR)
- Replies: 26
- Views: 116282
Re: Philip Lochner 1980 Jaguar XJS V12 5.3L (10:1 CR)
Philip I am trying to set up ms2 with just fuel No idle control no ac this is going to be a road race car so It will do most of its driving wide open I thaw a termac 5 speed with a 3:73 rear end So what will I need to make this happen The car is a1985 XJS v12 with a modified fuel rail and a aromotiv...
- Sat May 27, 2017 7:44 pm
- Forum: Jaguar, MGB, Triumph, Rover, Lotus, etc.
- Topic: 1984 Jaguar XJS V12 5.3L HE (11.5:1 CR)
- Replies: 63
- Views: 214313
Re: 1984 Jaguar XJS V12 5.3L HE (11.5:1 CR)
Thanks Just tolerate you know this car is not a road car I don't have the avv in the car No o2 s on it The reason I want to go to the ms2 is I need to keep it looking stock for vintage racing And I want to see what's going on with the ecu I have no way to read the Lucas ecu Unless you have a way to ...
- Wed May 24, 2017 2:47 pm
- Forum: Jaguar, MGB, Triumph, Rover, Lotus, etc.
- Topic: 1984 Jaguar XJS V12 5.3L HE (11.5:1 CR)
- Replies: 63
- Views: 214313
Re: 1984 Jaguar XJS V12 5.3L HE (11.5:1 CR)
I just found your posting I have a 1985 XJS with luaus ECM and i would like to change to Mega Squirt and yours look like what i need to do this swap. I also just joined this forum I will need all the help you can give me on this like pins out also the mapping of the mega squirt. tried to down load a...