www.MSruns.com read only forum (Jan.15,2018)

http://www.youtube.com/watch?v=4qbrpX1vmmg


MS2 daughter card installed
http://www.youtube.com/watch?v=Et5ZzN4OUOc
bit noisy on the rpm

the problem seems to be solved no more RPM spikes
Megasquirt MS2 extra 2.1.0 running paralel to the DTA S80 to test the tacho input just power and the tacho is connected to the tacho pulse for the RPM gauge with the same circuit as used by megasquirt to generate a tacho pulse http://www.msextra.com/doc/ms2extra/MS2 ... m#tachoout with a small adaptation the tacho input from megasquirt is connected between the 12 volt 1 Kohm resistor and the transistor the gate is connected to the RPM pulse the rpm is stable and without spikes

http://www.youtube.com/watch?v=3lK4NGNprZ0

video of the tacho pulse and the trigger pulse of the mercury capacitive ignition system
tacho pulse
http://www.youtube.com/watch?v=JaUMMs7gCC4
trigger pulse
http://www.youtube.com/watch?v=UBC4vLz4D2I&NR=1

bench test of the MS2 with 2.1.0. extra code doing 6 channel ignition on a simulated 36-1 wheel
engine constants are V6 two stroke wasted spark
http://www.youtube.com/watch?v=xjITjl1H8NI people interested in Two stroke outboards might find these threads interesting
http://www.msextra.com/forums/viewtopic ... 91&t=37073
http://www.msextra.com/forums/viewtopic ... 94&t=23972
http://www.msextra.com/forums/viewtopic ... 91&t=35645