megasquirt MS1 and MS2 V3 two stroke V6 mercury 2.5 liter

Boats, jet-skis, etc.
Post Reply
promaxefi
MegaSquirt Newbie
Posts: 2
Joined: Wed Dec 17, 2008 2:59 am
Location: the netherlands
Contact:

megasquirt MS1 and MS2 V3 two stroke V6 mercury 2.5 liter

Post by promaxefi »

http://www.youtube.com/watch?v=4qbrpX1vmmg
:yeah!:

MS2 daughter card installed
http://www.youtube.com/watch?v=Et5ZzN4OUOc :RTFM:
bit noisy on the rpm

the problem seems to be solved no more RPM spikes
Megasquirt MS2 extra 2.1.0 running paralel to the DTA S80 to test the tacho input just power and the tacho is connected to the tacho pulse for the RPM gauge with the same circuit as used by megasquirt to generate a tacho pulse http://www.msextra.com/doc/ms2extra/MS2 ... m#tachoout with a small adaptation the tacho input from megasquirt is connected between the 12 volt 1 Kohm resistor and the transistor the gate is connected to the RPM pulse the rpm is stable and without spikes

http://www.youtube.com/watch?v=3lK4NGNprZ0
promaxefi
MegaSquirt Newbie
Posts: 2
Joined: Wed Dec 17, 2008 2:59 am
Location: the netherlands
Contact:

Re: megasquirt MS1 and MS2 V3 two stroke V6 mercury 2.5 lite

Post by promaxefi »

video of the tacho pulse and the trigger pulse of the mercury capacitive ignition system
tacho pulse
http://www.youtube.com/watch?v=JaUMMs7gCC4
trigger pulse
http://www.youtube.com/watch?v=UBC4vLz4D2I&NR=1

bench test of the MS2 with 2.1.0. extra code doing 6 channel ignition on a simulated 36-1 wheel
engine constants are V6 two stroke wasted spark
http://www.youtube.com/watch?v=xjITjl1H8NI
06032010.jpg
people interested in Two stroke outboards might find these threads interesting
http://www.msextra.com/forums/viewtopic ... 91&t=37073
http://www.msextra.com/forums/viewtopic ... 94&t=23972
http://www.msextra.com/forums/viewtopic ... 91&t=35645
You do not have the required permissions to view the files attached to this post.
Post Reply