Mitubishi Lancer EVO (1) -93 -- 9.99s@220kmh

Post Reply
youask
MegaSquirt Newbie
Posts: 5
Joined: Sun Nov 07, 2004 1:29 pm
Location: Sweden

Mitubishi Lancer EVO (1) -93 -- 9.99s@220kmh

Post by youask » Thu Sep 06, 2007 5:32 am

Running MSnS-Extra HIRES code (v3.0 board)

Engine. Forged bottom end 4G63
Fuel: 1600cc injectors , 3x Walbro255lph , E85 fuel
Turbo: Holset HX40 #16, HKS 50mm Wastegate.

Best E.T. so far: 11.63s / 402m


Running both spark, fuel, boostcontrol , launch, flatshift of the MS
Last edited by youask on Fri Aug 07, 2009 12:58 am, edited 1 time in total.

User avatar
conrad2g
MegaSquirt Newbie
Posts: 1
Joined: Mon Nov 14, 2005 3:11 pm
Contact:

Mitubishi Lancer EVO (1) -93

Post by conrad2g » Thu Sep 06, 2007 3:41 pm

WoW, really nice! What kind of wheel or wheel combination you are using? How many teeth? Its VR or Hall?

- Jose

Neon Mode : Eclipse RS (Fuel n Spark w/ MS1)
Subaru RS 2.5L (Fuel only for now, fabricating crank wheel ;) MS1
Talon AWD 2.0 : 4g63 mode (Fuel n Spark w/ MS1)
Eclipse 2gNT/RS - All mods It could sustain...

Always enjoyed Open Source, now thanks to the MegaSquirt, I'm enjoying Open Hardware! Life is good or what!? Thank you ALL :D

youask
MegaSquirt Newbie
Posts: 5
Joined: Sun Nov 07, 2004 1:29 pm
Location: Sweden

Post by youask » Fri Sep 07, 2007 1:04 am

I use the stock CAS from a Mitsubishi Galant GTI
Wheel trigger is 4/2.

ignition module (wasted spark) from a Mitsubishi Galant GTI.
MSD DIS-2 ignition amp
Ford EDIS-4 coil
Ford EDIS ignition cables
NGK B*8ES gapped at 0.55mm plugs

renaldo
MegaSquirt Newbie
Posts: 1
Joined: Thu Mar 30, 2006 9:13 pm

Re: Mitubishi Lancer EVO (1) -93

Post by renaldo » Sun Mar 16, 2008 11:19 am

Can you Pm me a wiring diagram?
I have my car wired for the 4G92 Mivec engine but i'm now converting to the 4G63 do I have to do any wiring mods?
May I ask how much boost are you running, stock engine?

youask
MegaSquirt Newbie
Posts: 5
Joined: Sun Nov 07, 2004 1:29 pm
Location: Sweden

Re: Mitubishi Lancer EVO (1) -93

Post by youask » Tue Mar 18, 2008 5:47 am

the wiring is all at diyautotunes website

I got a forged engine, other cams, hx40 turbos. 2bar booost
Now running ms2-extra firmware, started up 2 days ago

youask
MegaSquirt Newbie
Posts: 5
Joined: Sun Nov 07, 2004 1:29 pm
Location: Sweden

Re: Mitubishi Lancer EVO (1) -93

Post by youask » Fri Aug 07, 2009 12:57 am

Now into the 9's :)


9.99s @ 220kmh

Post Reply