Page 1 of 1
Mitubishi Lancer EVO (1) -93 -- 9.99s@220kmh
Posted: Thu Sep 06, 2007 5:32 am
by youask
Running MSnS-Extra HIRES code (v3.0 board)
Engine. Forged bottom end 4G63
Fuel: 1600cc injectors , 3x Walbro255lph , E85 fuel
Turbo: Holset HX40 #16, HKS 50mm Wastegate.
Best E.T. so far: 11.63s / 402m
Running both spark, fuel, boostcontrol , launch, flatshift of the MS
Mitubishi Lancer EVO (1) -93
Posted: Thu Sep 06, 2007 3:41 pm
by conrad2g
WoW, really nice! What kind of wheel or wheel combination you are using? How many teeth? Its VR or Hall?
- Jose
Neon Mode : Eclipse RS (Fuel n Spark w/ MS1)
Subaru RS 2.5L (Fuel only for now, fabricating crank wheel ;) MS1
Talon AWD 2.0 : 4g63 mode (Fuel n Spark w/ MS1)
Posted: Fri Sep 07, 2007 1:04 am
by youask
I use the stock CAS from a Mitsubishi Galant GTI
Wheel trigger is 4/2.
ignition module (wasted spark) from a Mitsubishi Galant GTI.
MSD DIS-2 ignition amp
Ford EDIS-4 coil
Ford EDIS ignition cables
NGK B*8ES gapped at 0.55mm plugs
Re: Mitubishi Lancer EVO (1) -93
Posted: Sun Mar 16, 2008 11:19 am
by renaldo
Can you Pm me a wiring diagram?
I have my car wired for the 4G92 Mivec engine but i'm now converting to the 4G63 do I have to do any wiring mods?
May I ask how much boost are you running, stock engine?
Re: Mitubishi Lancer EVO (1) -93
Posted: Tue Mar 18, 2008 5:47 am
by youask
the wiring is all at diyautotunes website
I got a forged engine, other cams, hx40 turbos. 2bar booost
Now running ms2-extra firmware, started up 2 days ago
Re: Mitubishi Lancer EVO (1) -93
Posted: Fri Aug 07, 2009 12:57 am
by youask
Now into the 9's
9.99s @ 220kmh