Mitsu 6G72TT

Post Reply
Rivet
MegaSquirt Newbie
Posts: 2
Joined: Fri May 16, 2008 4:29 pm

Mitsu 6G72TT

Post by Rivet » Fri May 16, 2008 4:39 pm

We have a Mistsu 6G72TT from a JDM GTO on a dyno run stand. I finnaly got the thing to run. We are running an MS-II and Ford EDIS (firing the stock coils) with a 36-1 crank trigger. I still have to plumb the engine cooling system and water supply for our dyno, but it runs. Once we get the cooling system up and running, it will be time to tune!

The project is for a grant we have with the local school district. In the fall we plan to take the unit to the local high schools (it is completely portable) and let the students have a go at programing the unit. We'll then evaluate their "tunes" for power, fuel economy, and emissions.

I'll post some pic's later on.

Rivet
MegaSquirt Newbie
Posts: 2
Joined: Fri May 16, 2008 4:29 pm

Re: Mitsu 6G72TT

Post by Rivet » Mon Jun 02, 2008 7:34 am

I few pics
IMG_4859.JPG
IMG_4862.JPG
You do not have the required permissions to view the files attached to this post.

Zukiru
MegaSquirt Newbie
Posts: 1
Joined: Wed Jun 04, 2008 9:05 pm

Re: Mitsu 6G72TT

Post by Zukiru » Fri Jun 06, 2008 6:52 am

That's cool! :yeah!:

proturbo
MegaSquirt Newbie
Posts: 3
Joined: Thu Jan 30, 2014 4:58 am
Location: Semarang

Re: Mitsu 6G72TT

Post by proturbo » Wed Jul 23, 2014 4:41 pm

what type of ms u using sir?
may u please lecture me
im using v2.2 board
and 36-1
original igniter anf coil
original low imp injs
my car fired up but its not producing power when i rev up
Please see Forum Rules for signature limitations.

Post Reply