s13 with sr20det (from a pulsar)

For vehicles not yet running, but in the process of converting to MegaSquirt (ask a moderator to move your thread once you are running).
Post Reply
Gerad
MegaSquirt Newbie
Posts: 1
Joined: Wed Nov 25, 2009 2:40 pm

s13 with sr20det (from a pulsar)

Post by Gerad » Wed Nov 25, 2009 2:41 pm

Hi first of all , my name is Mihai , I am from romanaia , i'm a student .
I have a nissan 200sx ( s13 ) with a sr20det from a pulsar , i have made a adaptor plate for the gearbox , custom engine mounts , etc . Because the pulsar engine has a distribuitor a have to made a choise: to cut the firwall ( not a good option ) or to use a stand alone . I do not have mouch monney so i have build a megasquirt from scratch .


My setup is :
ms1 2.2 , vr conditoner added , boost cont , wideband ( lc-1 ) ,gm coil pack with ingnitor build in , 60-2 pullery , 444 cc inj , itb ( stock from pulsar ) , t28 ( stock pulsar)


Quiestion , can someone help me with a base map with good spark table ? ( the afr i can tune )

ps: sorry for my bad english

Post Reply