1939 Chevrolet hotrod

[bcal]

1939 Chev coupe (aussie sloper).
350 ci Chev V8, warm cam, fuelie heads, extractors.
670 cfm Holley 2bbl TBI
85lb injectors with 5ohm 25W resistors.
Carter low pressure pump, Bosch EFI pump.
2 liter (1/2 gallon) surge tank
15 psi fuel pressure
MS V2.2
Realy Board.
Narrow band O2
Req fuel 5
4 squirts alternating
Modified default VE table.

Starts easily and runs real smooth.
Much more responsive and more torque than the old spreadbore Holley it replaced.
Another satisfied customer

[drholl]

Hey Brett, I'm just starting the conversion of my stock 350270 HP 4 bbl to MS-II. If you post your msq many of us newbies would appreciate it. Me especially. Here's a baseline to start, using my values from my wifes 71 Monte Carlo. I was surprized to know how well it runs with such a lean mixture.

Baseline tuning for a Chevrolet Chevy 350
http://www.msefi.com/viewtopic.php?f=31 ... 81#p204781

Thanks
Holl

[drholl]

Hey Brett, Do you still have a .MSQ that you could post for some of us with TBI.

I'm still in the dark about using Accel Enrichment on a TBI for a stock Chevy 350.

Thanks Holl

[blown'37]

Hey man I have a '37 GMC hot rod that I squirted. Are you running edis by chance?