92 Mustang 306,TFS H/I/C 42lbinjectors ,255fuel pump Turbo!

Ford, Lincoln, Mercury, Merkur, etc.
92notch
MegaSquirt Newbie
Posts: 15
Joined: Thu Mar 30, 2006 6:13 am

Re: 92 Mustang 306,TFS H/I/C 42lbinjectors ,255fuel pump Tur

Post by 92notch »

Updated MSQ!!! Still running 3.1.1 same parts as in the title!
You do not have the required permissions to view the files attached to this post.
92 Mustang Notchback
DSS 306 ,TFS heads,intake and Stage 1 Cam
65mm TB, 42lbinjectors
B&G Custom Turbo Kit with t-67 garret turbo @7psi
MS 2 V3 extra code 3.1.1
russp81
MegaSquirt Newbie
Posts: 2
Joined: Thu Apr 28, 2011 11:03 pm

Re: 92 Mustang 306,TFS H/I/C 42lbinjectors ,255fuel pump Tur

Post by russp81 »

I have a few questions. I did some calculations at work today and determined that 24 lb/hr injectors will support up to 768 HP. To come to this number I used the PE of gasoline ~ 49.1 HP-hours (125,000 BTU/gal). I figured out the "limiting" time for the intake stroke assuming I red-line it at 6700 RPM, which comes out to 70.1 ms if you do the math to account for 180 degreez of the 720 degrees of crank rotation to figure out how long the intake stroke takes at 6700 RPM. Using that number, it is possible in theory, using a 24 lb/hr injector to inject .00731 ounces of fuel into the cylinder if held open for the entire duration of 70.1 ms. So, that math leads to the 768 HP if you use the standard assumption that 65% of that power is transferred as mechanical energy (not heat). I realize that this number is "ideal" and I won't be able to hold the injector open for the entire stroke, but it sure seems as though I'd be in the ball park if I'm looking to get 500 HP out of 24 lb/hr injectors. Am I missing something?

I just built my setup (shown in my sig), and I see that lots of people buy bigger fuel pumps and injectors and that makes perfect sense to me if you're still using the factory ECU, it has no idea you have a bigger injector / higher fuel pressure, etc...so in a way aren't those methods sort of "band-aids"?

Also, I chose not to buy the FMU / BTM / Tuner module that comes with the supercharger because again aren't those just band-aids? Doesn't having MS allow me to tune / tweak the existing equipement?

I'm just making sure I'm not missing something, because I've yet to see a post about a 500 HP machine using the factory fuel pump / smaller injectors, etc...

It seems to me that I can hold a smaller injector open for a longer period of time and get the same effect of pulsing a 42 lb/hr injector within the bounds of the factory ECU parameters.

I want to make sure I'm not out in left field before I start driving this thing around and leaning it out and learning the hard way. I do have O2 monitoring so that makes me a little more comfortable, but I could sure use some feedback on whether or not my reasoning is correct. Thanks guys!

BTW, I will definitely share all of my learnings, msq's, etc...as I go along. I look forward to the discussions / learnings!
91 LX 306', MS II V3 (PNP), TFS Twisted Wedge Heads, Motorsport "B" Cam, TFS Main Cap Girdle (with spacers), Cobra Intake, Vortech S-Trim 10 psi (V3-SC), 24 lb/hr injectors, Holley 70mm TB, Innovate Wideband O2 Controller / Gauge
russp81
MegaSquirt Newbie
Posts: 2
Joined: Thu Apr 28, 2011 11:03 pm

Re: 92 Mustang 306,TFS H/I/C 42lbinjectors ,255fuel pump Tur

Post by russp81 »

Basically, I already have 24 lb/hr injectors and I'd like to avoid dropping $300 or so to get bigger ones, if that wasn't evident by my last post!
91 LX 306', MS II V3 (PNP), TFS Twisted Wedge Heads, Motorsport "B" Cam, TFS Main Cap Girdle (with spacers), Cobra Intake, Vortech S-Trim 10 psi (V3-SC), 24 lb/hr injectors, Holley 70mm TB, Innovate Wideband O2 Controller / Gauge
boostdcoupe
MegaSquirt Newbie
Posts: 2
Joined: Sat Oct 02, 2010 1:39 pm

Re: 92 Mustang 306,TFS H/I/C 42lbinjectors ,255fuel pump Tur

Post by boostdcoupe »

nevermind...
a73camaro
MegaSquirt Newbie
Posts: 32
Joined: Fri Oct 08, 2004 5:44 am
Location: Dillon, CO

Re: 92 Mustang 306,TFS H/I/C 42lbinjectors ,255fuel pump Tur

Post by a73camaro »

If you have 16 injectors you will be about to support 700 HP. Eight injectors at 24 lb/hr will only support 350 HP.
jkmoffitt
MegaSquirt Newbie
Posts: 1
Joined: Sat Jan 21, 2012 2:23 pm

Re: 92 Mustang 306,TFS H/I/C 42lbinjectors ,255fuel pump Tur

Post by jkmoffitt »

I have a procharged 89 coupe running 5/6psi with 42# injectors, stock 302, and 255 pump. I am running MS2Extra with the latest firmware. I plan on using your latest tune as a base, I assume its going to be way rich given your after market H/C/I. Feel free to email me at jkmoffitt88@aol.com with any advice. I have spent the last week or so reading as much as I can and asking around on the forums for help. At times I feel like I'm going in circles! I would PM you but I do not have the privileges.

Thanks!
92notch
MegaSquirt Newbie
Posts: 15
Joined: Thu Mar 30, 2006 6:13 am

Re: 92 Mustang 306,TFS H/I/C 42lbinjectors ,255fuel pump Tur

Post by 92notch »

My tune is a good starting point for you will be alittle rich
But that us ok. Guve it a shot. One thing is before you roll out
Make sure the timing in tuberstudio matches the timing on the balancer.
My email address is mustangnotch92@yahoo.com if you have any
More questions
92 Mustang Notchback
DSS 306 ,TFS heads,intake and Stage 1 Cam
65mm TB, 42lbinjectors
B&G Custom Turbo Kit with t-67 garret turbo @7psi
MS 2 V3 extra code 3.1.1
rdclark123
MegaSquirt Newbie
Posts: 1
Joined: Thu Mar 08, 2012 5:37 am

Re: 92 Mustang 306,TFS H/I/C 42lbinjectors ,255fuel pump Tur

Post by rdclark123 »

92notch,
I would love to get ahold of your n/a before you booosted. we have around the same mods and this ms2 is kickin my butt. i also plan to boost the car so i will be checking out your tune you posted. i didn't see where you posted your n/a tune before the turbo.
thanks alot
92notch
MegaSquirt Newbie
Posts: 15
Joined: Thu Mar 30, 2006 6:13 am

Re: 92 Mustang 306,TFS H/I/C 42lbinjectors ,255fuel pump Tur

Post by 92notch »

it is the same tune as my Turbo tune only think different was that i added cells at the top in the spark and ve maps for boost you will be able to run fine on that. But i will try to dig up my old tune. i will keep you posted
92 Mustang Notchback
DSS 306 ,TFS heads,intake and Stage 1 Cam
65mm TB, 42lbinjectors
B&G Custom Turbo Kit with t-67 garret turbo @7psi
MS 2 V3 extra code 3.1.1
gixxerpro
MegaSquirt Newbie
Posts: 1
Joined: Tue Feb 12, 2013 11:20 am

Re: 92 Mustang 306,TFS H/I/C 42lbinjectors ,255fuel pump Tur

Post by gixxerpro »

Hello, Im building an 88 Mustang with a Lightning 351 windsor with the following parts: X303 roller cam, ported GT40 heads and intake, Pony down turbo hot side with a Turbonetics T70 ball bearing turbo with a newgen w/g and raptor b.o.v. blowing through an ebay intercooler. I have new fuel rails and set of f.a.s.t. 47.5 lb an hour fuel injectors. Fuel pumps are walbro 255's in tank and inline. I have an innovate MSBC-1 boost control. I am considering a megasquirt kit now and would like to hear your up and down stories about your install. I would also like to get a copy of your tune. My name is Tony and my email is gixxerproo@yahoo.com. I look forward to hearing from you. Thanks a lot for your time.
Post Reply