90 Fox with 347 and MS3x

Ford, Lincoln, Mercury, Merkur, etc.
Post Reply
twelvexs
MegaSquirt Newbie
Posts: 1
Joined: Mon Aug 29, 2016 6:27 am

90 Fox with 347 and MS3x

Post by twelvexs »

Completed fox with MS3x street/fun car.

Mods are:
- 347 CID, 10.8:1 CR, N/A build. Stock block.
- RHS 200cc heads, ‘as-cast’
- Comp XFI cam, I-236/E-248 @ .050 w/ .579 lift
- Super Victor EFI intake
- Edelbrock 36lb/hr injectors
- Edelbrock 1000CFM T/B
- Seq spark/ign with MS3x
- 1-5/8" -> 1-3/4" step headers
- GZ Motorsports Crank Evac
- E-pump and E-fans controlled by MS

Recently did a dyno tune by Wes Kaiser @ EFIAnalytics in Mooresville, NC. Car put down 430 RWHP at 6300 on 93 pump gas.

The auto-tune feature in TunerStudio got the car really close-just needed to take timing out to make that power.

Really impressed with the MS product. Sure there's a learning curve, but with some patience and reading it works great. Car is drivable anywhere, anytime.
IMG_3247 (480x640).jpg
DynoSheet_Power_Pull (640x480).jpg
You do not have the required permissions to view the files attached to this post.
Post Reply