1995 GTI VR6 N/A

User avatar
Paul_VR6
Helpful Squirter
Posts: 61
Joined: Thu May 27, 2004 10:14 am
Location: Elkton, MD

Re: 1995 GTI VR6 N/A

Post by Paul_VR6 » Mon Aug 03, 2009 5:25 am

When I get some time I'll put my OBD2 tb back on the bench and figure out the best way.
-Paul
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com

User avatar
Paul_VR6
Helpful Squirter
Posts: 61
Joined: Thu May 27, 2004 10:14 am
Location: Elkton, MD

Re: 1995 GTI VR6 N/A

Post by Paul_VR6 » Wed Aug 26, 2009 11:49 am

Running on MS3 :shock:
-Paul
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com

dirtytorque
MegaSquirt Newbie
Posts: 13
Joined: Fri Apr 11, 2008 5:28 pm

Re: 1995 GTI VR6 N/A

Post by dirtytorque » Wed Aug 26, 2009 1:55 pm

Paul_VR6 wrote:Running on MS3 :shock:
Hows it going,what are the benefits then?
MS2 g60 Corrado. 14psi.

User avatar
Paul_VR6
Helpful Squirter
Posts: 61
Joined: Thu May 27, 2004 10:14 am
Location: Elkton, MD

Re: 1995 GTI VR6 N/A

Post by Paul_VR6 » Thu Aug 27, 2009 4:18 am

Good so far had it running without too much trouble once I figured out that inj5 I had left unplugged after taking the fuel rail out.

MS3 info here: http://www.ms3efi.com/

The USB and the SD logging make it very appealing to me.
-Paul
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com

User avatar
Paul_VR6
Helpful Squirter
Posts: 61
Joined: Thu May 27, 2004 10:14 am
Location: Elkton, MD

Re: 1995 GTI VR6 N/A

Post by Paul_VR6 » Tue Sep 08, 2009 2:26 am

MS3 update: even with test hardware on beta code things are going relatively smoothly. I'm to the point where I was on MS1E and even tuning from scratch by datalogging I got there much quicker. I'm going to do some things I never got to on MS1 like closed loop idle, and try and actually figure out my injector constants experimentally.
-Paul
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com

meijerbrantm
MegaSquirt Newbie
Posts: 1
Joined: Tue Jun 01, 2010 5:36 am

Re: 1995 GTI VR6 N/A

Post by meijerbrantm » Tue Jun 01, 2010 7:03 pm

I was wondering if you could post one of your MS2 MSQ files. I messaged you about this once and you said you'd post one. Thanks!

User avatar
Paul_VR6
Helpful Squirter
Posts: 61
Joined: Thu May 27, 2004 10:14 am
Location: Elkton, MD

Re: 1995 GTI VR6 N/A

Post by Paul_VR6 » Wed Jun 02, 2010 5:55 am

Here is one from a customer of mine running 60lb/hr injectors
You do not have the required permissions to view the files attached to this post.
-Paul
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com

monza20vt
MegaSquirt Newbie
Posts: 2
Joined: Mon Jun 29, 2009 4:32 am

Re: 1995 GTI VR6 N/A

Post by monza20vt » Fri Sep 14, 2012 12:32 pm

Cheeky bump ;)

eurocrap87
MegaSquirt Newbie
Posts: 2
Joined: Mon Nov 10, 2014 4:58 pm

Re: 1995 GTI VR6 N/A

Post by eurocrap87 » Thu Nov 13, 2014 11:54 am

Thanks for the info it was very helpfull, it starts and is not displaying the iat and clt on tunnerstudio il check that later , i was wondering if i can delete the maf i dont want to use it any help i am goin turbo.

Post Reply