1995 GTI VR6 N/A

User avatar
Paul_VR6
Helpful Squirter
Posts: 61
Joined: Thu May 27, 2004 10:14 am
Location: Elkton, MD

Re: 1995 GTI VR6 N/A

Post by Paul_VR6 » Tue May 26, 2009 6:59 am

The diagram would look like my wiring schedule above, I used all stock engine wiring.

If you want info on a pre-configured setup shoot an email to kandpperformance@gmail.com
-Paul
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com

l3 onp
MegaSquirt Newbie
Posts: 2
Joined: Thu Aug 07, 2008 3:53 am

Re: 1995 GTI VR6 N/A

Post by l3 onp » Fri May 29, 2009 8:10 am

cheers mate, you got an email! :)

User avatar
Paul_VR6
Helpful Squirter
Posts: 61
Joined: Thu May 27, 2004 10:14 am
Location: Elkton, MD

Re: 1995 GTI VR6 N/A

Post by Paul_VR6 » Thu Jul 09, 2009 7:05 am

Sold all the MS1 PnP stuff, car is going to MS2 by the end of next week. 8)
-Paul
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com

dirtytorque
MegaSquirt Newbie
Posts: 13
Joined: Fri Apr 11, 2008 5:28 pm

Re: 1995 GTI VR6 N/A

Post by dirtytorque » Fri Jul 17, 2009 5:38 am

8) 8)

No pics of thisd car?? :)
MS2 g60 Corrado. 14psi.

User avatar
Paul_VR6
Helpful Squirter
Posts: 61
Joined: Thu May 27, 2004 10:14 am
Location: Elkton, MD

Re: 1995 GTI VR6 N/A

Post by Paul_VR6 » Fri Jul 17, 2009 5:45 pm

Silly me!

Image
-Paul
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com

hsbr
MegaSquirt Newbie
Posts: 5
Joined: Fri Feb 27, 2009 11:34 pm

Re: 1995 GTI VR6 N/A

Post by hsbr » Thu Jul 23, 2009 3:39 pm

What is the idle valve your using from?

I'm using an obd2 aba tb and they are the same as obd2 vr6 ones from what i've learned, and i can't get the idle valve motor to close the throttle plate enough to idle below 1200.

Did you modify your obd2 tb?

dirtytorque
MegaSquirt Newbie
Posts: 13
Joined: Fri Apr 11, 2008 5:28 pm

Re: 1995 GTI VR6 N/A

Post by dirtytorque » Fri Jul 24, 2009 12:56 am

hsbr wrote:What is the idle valve your using from?

I'm using an obd2 aba tb and they are the same as obd2 vr6 ones from what i've learned, and i can't get the idle valve motor to close the throttle plate enough to idle below 1200.

Did you modify your obd2 tb?
have you tried adjusting timing and fueling to get the idle rpm lower?
MS2 g60 Corrado. 14psi.

hsbr
MegaSquirt Newbie
Posts: 5
Joined: Fri Feb 27, 2009 11:34 pm

Re: 1995 GTI VR6 N/A

Post by hsbr » Fri Jul 24, 2009 9:04 am

Yeah i've played with the timing and fuel but it seems to just readjust it self back to a high idle.

In order to drop rpm's would i lean out the bins its in and remove some advance?

User avatar
Paul_VR6
Helpful Squirter
Posts: 61
Joined: Thu May 27, 2004 10:14 am
Location: Elkton, MD

Re: 1995 GTI VR6 N/A

Post by Paul_VR6 » Mon Jul 27, 2009 8:41 am

I'm still using the OBD1 throttle body. The OBD2 tb's will like more then 100hz for them to work right, but as you increase the freq I think the adjustment gets coarser. What are your current settings? You should be able to get the car to stall with only the tb idle bypass.
-Paul
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com

hsbr
MegaSquirt Newbie
Posts: 5
Joined: Fri Feb 27, 2009 11:34 pm

Re: 1995 GTI VR6 N/A

Post by hsbr » Sun Aug 02, 2009 10:54 pm

Well, i took apart the obd2 tb and pulled out the spring that holds the tb open, sucessfully..and tapped a spot that would work for an idle screw for now.

But if anyone figures out how to just open up the throttle body in a controlled manner then i'll be ready, cuz i've heard that you need to reverse the polarity to get the tb to close more then it sits standard.

Post Reply