SCCA GTL Scirocco

Post Reply
prof315
MegaSquirt Newbie
Posts: 2
Joined: Tue Mar 10, 2009 8:30 am

SCCA GTL Scirocco

Post by prof315 » Tue Mar 10, 2009 8:38 am

Full Tube Frame GT Lite Scirocco (SCCA road racer)
1.8L 8V Eurospec head
14to1 compression 25mm SIR
MS2 V3.57 MSextra 2.01 code
currently fuel only but soon to be fuel and wasted spark
Thanks to the folks at DIYautotune and all those on the forums who helped get this sucker up and running

prof315
MegaSquirt Newbie
Posts: 2
Joined: Tue Mar 10, 2009 8:30 am

Re: SCCA GTL Scirocco

Post by prof315 » Sun May 17, 2009 4:07 am

Ok we are now full-on fuel and spark control through the MS2. I was having issues getting a clean rpm signal from the 60-2 tooth wheel but found a post where Matt Cramer @ DIYautotune suggested putting a 10kohm resistor in the VR sensor signal wire and presto no more problems.

whrichardson420
MegaSquirt Newbie
Posts: 2
Joined: Tue Jul 02, 2013 1:25 pm

Re: SCCA GTL Scirocco

Post by whrichardson420 » Fri Sep 20, 2013 10:03 am

Hey i have a rabbit that i road race in H prod it is sorta like yours but less comppresion. my engin is 1.8 8v with 12.5 comp, 308 cam 450 lift and a fully ported head.. i wanted to know if you have any fuel map ideas for me to start with or helpfull hints? thanks

Post Reply