Neal Bob's ITB'd MK2 ABA

Post Reply
Paul_VR6
Helpful Squirter
Posts: 61
Joined: Thu May 27, 2004 10:14 am
Location: Elkton, MD

Neal Bob's ITB'd MK2 ABA

Post by Paul_VR6 »

MS1 V3
MS-E 029y4
VR input circuit
both pots fully ccw
vroutinv jumper
LED with 1k 5v pullup output to stock coil
using MAP for fulltime baro

Rebuilt 2L ABA
Extrudabody ITBs
268 cam
TT Downpipe
TT cat
TT exhaust

Image

Tuning is rough and in process. Having some afr table problems with log viewer but it starts and drives decently at this point.
You do not have the required permissions to view the files attached to this post.
-Paul
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com
Paul_VR6
Helpful Squirter
Posts: 61
Joined: Thu May 27, 2004 10:14 am
Location: Elkton, MD

Re: Neal Bob's ITB'd MK2 ABA

Post by Paul_VR6 »

Good street tune complete.
You do not have the required permissions to view the files attached to this post.
-Paul
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com
Post Reply