MS2 VR6 AAA OBD2 n/a

Post Reply
AjVR
MegaSquirt Newbie
Posts: 1
Joined: Sun Jan 24, 2010 6:20 pm

MS2 VR6 AAA OBD2 n/a

Post by AjVR »

Car is a mk2 golf with odb2 vr6 AAA

MS2

Mods:
Maf delete
intake
Manifold back exhaust

Well worked on my map and finally got it running pretty good now , few small stumbles around town driving but will try and clear them up and update as i go.

Took the car to the track and ran a 15.0 with 2.8 60 ft no tach and 5 degrees to 10 degrees pulled off my up top end timing until i can get some sort of knock sense.

Obviously take no responsibility for anyone using my map but should be good enough to get you running.

Will update with a dyno map later in the month :)


Thanks to paul ,and others who have posted there maps up here as helped me get mine running.

pic of the car:
Image
You do not have the required permissions to view the files attached to this post.
Paul_VR6
Helpful Squirter
Posts: 61
Joined: Thu May 27, 2004 10:14 am
Location: Elkton, MD

Re: MS2 VR6 AAA OBD2 n/a

Post by Paul_VR6 »

At WOT you can probably add a few deg if you're on 93 octane. Peak torque was always with 34deg on my car. Glad I could help!
-Paul
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com
Post Reply