VR6 Turbo 12valve on MS2-Extra

Lapkritis
MegaSquirt Newbie
Posts: 14
Joined: Sun Jul 22, 2007 10:34 pm

VR6 Turbo 12valve on MS2-Extra

Post by Lapkritis » Fri Jul 01, 2011 8:28 pm

Converted from MS1-Extra and would highly recommend it to other MS1 users. Still a lot of tuning to do but this base will get you going fast. Conversion notes:

1) Added Jumper wire from S12C to JS9 (Per MS2 Hardware assembly notes V3 board)
2) Changed Jumper that was “TSEL to VROUTINV” to “TSEL to VROUT”
3) Retained Crystal, Y1
4) Noise Filtering "On", Tach Period Rejection "On"; .1MS Time, 10%

Other:
- MS2-Extra 3.1.1
- Innovate LM-1 mimicking LC-1
- Speed density algorithm
- Siemens Deka 60lbs injectors
- A1000 Fuel pump
- A1000 Fuel pressure regulator set to 35psi base fuel pressure with boost port connected for 1:1 rising rate.
- 400KPA map sensor
- OEM coilpack w/o control module
- Autolite 3923 gapped to .024
- OBD1 TB
- Schimmel Short runner intake
- Autotech 262 cams
- Garrett T04Z, .96ar undivided hotside
- 3" turbo back w/hi flow catalyst
- Tial 35mm Wastegate/50mm BOV
- 9:1 compression
- 20lbs boost

Happy Hunting!
You do not have the required permissions to view the files attached to this post.
-Andrew

romano
MegaSquirt Newbie
Posts: 3
Joined: Fri Aug 03, 2012 12:40 am

Re: VR6 Turbo 12valve on MS2-Extra

Post by romano » Fri Aug 03, 2012 1:41 pm

Hi Lapkritis,


I've started the migration from OEM ecu to a MSQUIRT2 ecu because of turbo config.

I have one doubt, I've already heared that VR6 have:
hall sensor for crank speed, your mods are more "online" with a VR sensor config.
a trigger angle of 90° BTDC, in your msq I could read 78°

Could help/explain to me if there any difference between US and European version


Thanks for your help!

romano.

Lapkritis
MegaSquirt Newbie
Posts: 14
Joined: Sun Jul 22, 2007 10:34 pm

Re: VR6 Turbo 12valve on MS2-Extra

Post by Lapkritis » Fri Aug 03, 2012 8:03 pm

romano wrote:Hi Lapkritis,


I've started the migration from OEM ecu to a MSQUIRT2 ecu because of turbo config.

I have one doubt, I've already heared that VR6 have:
hall sensor for crank speed, your mods are more "online" with a VR sensor config.
a trigger angle of 90° BTDC, in your msq I could read 78°

Could help/explain to me if there any difference between US and European version


Thanks for your help!

romano.
The crank position sensor on the vr6 is a vr sensor. The cam position sensor on the vr6 is a hall sensor. My installation here is utilizing the crank position sensor only with fuel wired by bank. Trigger angle is correct at 78°... I am unfamiliar with any 90° applications.

Here is my latest MSQ good to 23psi on MS 3.3Alpha5 code which is the latest release as of this posting.
You do not have the required permissions to view the files attached to this post.
-Andrew

romano
MegaSquirt Newbie
Posts: 3
Joined: Fri Aug 03, 2012 12:40 am

Re: VR6 Turbo 12valve on MS2-Extra

Post by romano » Fri Aug 03, 2012 11:50 pm

I'm talking of a AAA european version. One coil and distributor, speed sensor from crank had 3 pins


Is there a major difference between US and EUROPEAN version?

Romain.

User avatar
kholman
Site Admin
Posts: 40
Joined: Fri Feb 02, 2007 12:54 pm

Re: VR6 Turbo 12valve on MS2-Extra

Post by kholman » Sun Aug 05, 2012 7:45 pm

viewtopic.php?f=88&t=22798
Success stories for users of all variants of MegaSquirt® who have successfully used MegaSquirt® on their vehicle, or who want to document their MegaSquirt® project.
If you are seeking assistance with your MegaSquirt® project, you should post your questions in the forums dealing with your configuration and MegaSquirt® product.
Forum Admin Team

monza20vt
MegaSquirt Newbie
Posts: 2
Joined: Mon Jun 29, 2009 4:32 am

Re: VR6 Turbo 12valve on MS2-Extra

Post by monza20vt » Wed Dec 12, 2012 12:09 pm

Thanks for the MSQ's 84 downloads and not one thank you :roll:

Should help me with mine this winter :)

Lapkritis
MegaSquirt Newbie
Posts: 14
Joined: Sun Jul 22, 2007 10:34 pm

Re: VR6 Turbo 12valve on MS2-Extra

Post by Lapkritis » Wed Feb 20, 2013 12:53 pm

More aggressive ignition and some power improvement.
You do not have the required permissions to view the files attached to this post.
-Andrew

Lapkritis
MegaSquirt Newbie
Posts: 14
Joined: Sun Jul 22, 2007 10:34 pm

Re: VR6 Turbo 12valve on MS2-Extra

Post by Lapkritis » Wed Feb 20, 2013 12:54 pm

monza20vt wrote:Thanks for the MSQ's 84 downloads and not one thank you :roll:

Should help me with mine this winter :)
Always glad to share even if no thanks are given. :mrgreen:
-Andrew

Dannuku
MegaSquirt Newbie
Posts: 1
Joined: Thu Sep 04, 2014 1:19 pm

Re: VR6 Turbo 12valve on MS2-Extra

Post by Dannuku » Mon Oct 06, 2014 12:18 pm

Thanks for sharing your setup...will try it soon...

eurocrap87
MegaSquirt Newbie
Posts: 2
Joined: Mon Nov 10, 2014 4:58 pm

Re: VR6 Turbo 12valve on MS2-Extra

Post by eurocrap87 » Fri Jan 02, 2015 10:58 am

Thanks for thw file keep the good worck !

Post Reply