VR6 Turbo 12valve on MS2-Extra
VR6 Turbo 12valve on MS2-Extra
1) Added Jumper wire from S12C to JS9 (Per MS2 Hardware assembly notes V3 board)
2) Changed Jumper that was “TSEL to VROUTINV” to “TSEL to VROUT”
3) Retained Crystal, Y1
4) Noise Filtering "On", Tach Period Rejection "On"; .1MS Time, 10%
Other:
- MS2-Extra 3.1.1
- Innovate LM-1 mimicking LC-1
- Speed density algorithm
- Siemens Deka 60lbs injectors
- A1000 Fuel pump
- A1000 Fuel pressure regulator set to 35psi base fuel pressure with boost port connected for 1:1 rising rate.
- 400KPA map sensor
- OEM coilpack w/o control module
- Autolite 3923 gapped to .024
- OBD1 TB
- Schimmel Short runner intake
- Autotech 262 cams
- Garrett T04Z, .96ar undivided hotside
- 3" turbo back w/hi flow catalyst
- Tial 35mm Wastegate/50mm BOV
- 9:1 compression
- 20lbs boost
Happy Hunting!
Re: VR6 Turbo 12valve on MS2-Extra
I've started the migration from OEM ecu to a MSQUIRT2 ecu because of turbo config.
I have one doubt, I've already heared that VR6 have:
hall sensor for crank speed, your mods are more "online" with a VR sensor config.
a trigger angle of 90° BTDC, in your msq I could read 78°
Could help/explain to me if there any difference between US and European version
Thanks for your help!
romano.
Re: VR6 Turbo 12valve on MS2-Extra
The crank position sensor on the vr6 is a vr sensor. The cam position sensor on the vr6 is a hall sensor. My installation here is utilizing the crank position sensor only with fuel wired by bank. Trigger angle is correct at 78°... I am unfamiliar with any 90° applications.romano wrote:Hi Lapkritis,
I've started the migration from OEM ecu to a MSQUIRT2 ecu because of turbo config.
I have one doubt, I've already heared that VR6 have:
hall sensor for crank speed, your mods are more "online" with a VR sensor config.
a trigger angle of 90° BTDC, in your msq I could read 78°
Could help/explain to me if there any difference between US and European version
Thanks for your help!
romano.
Here is my latest MSQ good to 23psi on MS 3.3Alpha5 code which is the latest release as of this posting.
Re: VR6 Turbo 12valve on MS2-Extra
Is there a major difference between US and EUROPEAN version?
Romain.
Re: VR6 Turbo 12valve on MS2-Extra
Success stories for users of all variants of MegaSquirt® who have successfully used MegaSquirt® on their vehicle, or who want to document their MegaSquirt® project.
If you are seeking assistance with your MegaSquirt® project, you should post your questions in the forums dealing with your configuration and MegaSquirt® product.
Re: VR6 Turbo 12valve on MS2-Extra
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
Should help me with mine this winter
![Smile :)](./images/smilies/icon_smile.gif)
Re: VR6 Turbo 12valve on MS2-Extra
Re: VR6 Turbo 12valve on MS2-Extra
Always glad to share even if no thanks are given.monza20vt wrote:Thanks for the MSQ's 84 downloads and not one thank you![]()
Should help me with mine this winter
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Re: VR6 Turbo 12valve on MS2-Extra
-
- MegaSquirt Newbie
- Posts: 2
- Joined: Mon Nov 10, 2014 4:58 pm