'85 Golf VR6

Post Reply
JRaptor2000
MegaSquirt Newbie
Posts: 6
Joined: Wed Apr 09, 2008 11:27 am

'85 Golf VR6

Post by JRaptor2000 »

Got my '85 Golf VR6 wired up and fired up yesterday.

Running MS1 V3, HR10g
Distributor motor
Short runner intake manifold
Stock fueling

Started up first try with Paul_VR6's "Timrunning5.msq".

Anyone know how to get the AEM UEGO to read correctly with tunerstudio? Would really like to be able to use the AFR target table...
einsereier
MegaSquirt Newbie
Posts: 10
Joined: Tue Mar 29, 2011 1:46 pm

Re: '85 Golf VR6

Post by einsereier »

0-5v analog output Gasoline values from 10 to 20:1 AFR
found this info on the aem uegocontroller.
i guess you can use the lc1 wideband setting.
king
MegaSquirt Newbie
Posts: 1
Joined: Mon Aug 13, 2012 12:19 am

Re: '85 Golf VR6

Post by king »

can you show me how you connected the cables to the coilpack ? , i have spark A,B,C from MS, my guess is that they should be connected to the three center pins at the coilpack but i dont know witch one ?
Paul_VR6
Helpful Squirter
Posts: 61
Joined: Thu May 27, 2004 10:14 am
Location: Elkton, MD

Re: '85 Golf VR6

Post by Paul_VR6 »

The coilpack trigger wires go in the same order as the wire locations pairs on the towers. 1/6=a, 2/5=b, 3/4=c
-Paul
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com
Post Reply