Page 1 of 1

single turbo supra mk4 2jzgte

Posted: Mon Feb 04, 2008 2:48 pm
by toejam
single turbo supra mk4 2jzgte

ms v3.57 msns 1 extra running latest hres code & 4 bar mapdaddy map sensor

1000cc low impedance injectors running individual 7.5 ohm resistors

2 edis 6 running coil on plug on iridium plugs

gt45 t67 single turbo conversion.

after market inlet manifold & 100mm throttle body

front mount intercooler & hard pipe conversion

Larger after market alloy radiator

Blitz dual sbc boost controller

HKS BOV

Alloy pullies

Walbro fuel pump, fuel regulator and hks fuel rail

standard internals although a set of cams are ordered

560BHP @ 21psi on the rollers today

Will update when i get the cams fitted

Re: single turbo supra mk4 2jzgte

Posted: Tue Mar 18, 2008 5:11 pm
by toejam
hi there i fitted cams (stage 2) 272 degs

i was able to achieve 600bhp @ 2 bar of boost on 97 ron fuel. i am upgrading to ms2 in order to get the high res and 16 x 16 spark & fuel tables. i will be fitting bigger valves & flowing the head and uprating the actuator spring to take more boost. i will be running the car this year at santa pod. i will be running 110 racing fuel, and hopefully 2.5 bar of boost and plan a remap. i hope to be close to 800bhp on the race fuel!

Re: single turbo supra mk4 2jzgte

Posted: Thu May 15, 2008 5:24 pm
by UBHSTRY
Doing this with my sc300, hope you guys can help me out :P

Re: single turbo supra mk4 2jzgte

Posted: Wed Jun 25, 2008 2:40 am
by nyabinghi
Very good projetc and good results.
have you got some pics or video of your car ?
toejam wrote: i am upgrading to ms2 in order to get the high res and 16 x 16 spark & fuel tables.
MS2/extra has 16x16 fuel table but only 12x12 spark table.

Re: single turbo supra mk4 2jzgte

Posted: Wed Oct 08, 2008 2:44 pm
by PUMPISH
Great project!

What triggerwheel do you run?