Name: Herb Berwald
Vehicle: 1973 Porsche 914 track car
Engine: 2.0 liter tired engine
Injection: I used the on board relay board for aux air and fuel pump relay, all else goes to the relay board. I also have a tech edge wide band O2 sensor...I used 10 ohm, 25 watt resistors for the injectors, Right now I am about 20% duty cycle and 2.1ms injection time.
Description: It runs!! Thanks for a great kit and all the support! This is fun stuff.... I still need to tune drivability, but it starts/idles and revs. I am not getting a good signal from the TPS yet and still need to scale the temperature sensors. I will use the stock cylinder head temperature sensor and inlet air temperature sensor.
1 post • Page 1 of 1