Gustaf Ulander/therealpinto, 1988 BMW 325 turbo

Post Reply
therealpinto
MegaSquirt Newbie
Posts: 6
Joined: Mon May 03, 2004 7:41 am
Location: Sweden
Contact:

Gustaf Ulander/therealpinto, 1988 BMW 325 turbo

Post by therealpinto » Mon May 22, 2006 5:11 am

Name: Gustaf Ulander
Vehicle: 1988 BMW 325
Engine: M20B25 straight six, turbocharged
Injection: Port, now running 390 cc injectors
Description: Running MSI V3.0 board with MS-extra 024s13c code (MT 2.25b717). Uses standard BMW VR trigger and 60-2 wheel, Volvo 440 TPS (Bosch, need to swap two wires for it to run the right way on BMW wiring), Ford IAC (PWM controlled, warmup only), Ford IAT. Only mapped to 0,6 bar but seems to run OK.
Website: http://www.whynotracing.com
__________________________________
Ford Capri 2.0 Turbo
Past projects:
2.8 Twin turbo & 2.9 24v Twin turbo
BMW 325 E30 Turbo - 400 whp and 620 Nm
MS&EDIS/MS-extra

therealpinto
MegaSquirt Newbie
Posts: 6
Joined: Mon May 03, 2004 7:41 am
Location: Sweden
Contact:

Post by therealpinto » Tue May 29, 2007 3:02 am

Update: The car is now sold. Before we sold it we upgraded to bigger injectors and mapped it up to about 1.2 bar.

The new owner has dynoed the car and at a "safe" 1 bar boost it gave 397 whp. Some tinkering and a stable boost of 1.2 bar gave a smidgen over 400 whp and over 620 Nm.

A really nice car to drive, served as a daily driver during the summer of 2006.

Gustaf
__________________________________
Ford Capri 2.0 Turbo
Past projects:
2.8 Twin turbo & 2.9 24v Twin turbo
BMW 325 E30 Turbo - 400 whp and 620 Nm
MS&EDIS/MS-extra

Post Reply