Karl Anders Øygard, 1985 BMW 635CSi

Post Reply
karlo
MegaSquirt Newbie
Posts: 3
Joined: Wed Jul 21, 2004 2:38 pm
Location: Oslo, Norway

Karl Anders Øygard, 1985 BMW 635CSi

Post by karlo »

Name: Karl Anders Øygard

Vehicle: 1985/BMW/635CSi

Engine: 3.5, Straight Six, M30B35 (not original engine, from an E34) with Schrick 284 cam

Injection: Standard Port Injection Set-up, semi sequential

Megasquirt: V3, with MS2/extra 3.0.3 alpha

Runs MS2/Extra with LC1 wideband. Everything works like stock. Motronic had serious issues with idle hesitation, that's all gone now. Better mileage too. Added flex fuel sensor, have been using E85 with good results. Replaced single coil with a Bosch wasted spark unit.

Main reason for MSing car is that I will be transplanting an S38B35 engine into the car.

Website: http://people.opera.com/~karlo/m6.html
Last edited by karlo on Sat Sep 26, 2009 12:06 pm, edited 3 times in total.
youask
MegaSquirt Newbie
Posts: 5
Joined: Sun Nov 07, 2004 1:29 pm
Location: Sweden

Re: Karl Anders Øygard, 1985 BMW 635CSi

Post by youask »

Can you post your ignition map for this?

thanks
karlo
MegaSquirt Newbie
Posts: 3
Joined: Wed Jul 21, 2004 2:38 pm
Location: Oslo, Norway

Re: Karl Anders Øygard, 1985 BMW 635CSi

Post by karlo »

Here's one of the last msqs. This is for MS2/extra beta 17, but you should be able to read the ignition map. I think I pulled the ignition map from an M30B34, I'm still looking for the map for an M30B35. There's probably not a big difference, though.
You do not have the required permissions to view the files attached to this post.
jeff01
MegaSquirt Newbie
Posts: 3
Joined: Thu Jul 20, 2006 9:52 am

Re: Karl Anders Øygard, 1985 BMW 635CSi

Post by jeff01 »

Could you help me with fuel map :) ? I opened the file but VE table vas not a normal I think
It would help me a lot..
Thank you
Post Reply