Page 1 of 1

barf, 1984 E30 323i

Posted: Sat Jan 26, 2008 4:57 pm
by barf
fuel only, getting rpm signal from tacho. although the VR in the distributor provided a working RPM signal there is a centrifugal advance i need to lock-up before attempting spark control, and the old bmw throttle position sensor isn't really a sensor it's a switch for WOT.

tuning still in progress (like i'll ever finish tuning!). old fuel system called for slightly higher than calculated req_fuel I have settled between 18.0-19.0
tuned VE tables with the megatune table generator for a 6000rpm redline 35kpa idle and 161lb-ft@5000 / 160bhp@6000

Re: barf, 1984 E30 323i

Posted: Tue Jun 10, 2008 11:55 pm
by ehrnst
got the ignition up and running with MS now?