Westfield SEiGHT

Post Reply
adamnreeves
MegaSquirt Newbie
Posts: 5
Joined: Mon Jul 27, 2009 2:10 pm

Westfield SEiGHT

Post by adamnreeves »

Rover V8 4.6 Megasquirt 1 PCB version 3.0 running MSextra 29y4. EDIS8 ignition module.

Soldered up Megasquirt myself. Built engine up from a block. Made my own engine and ECU looms. First time done any of this and it fired up first time!

http://www.youtube.com/watch?v=njvRbzIJ0aM
adamnreeves
MegaSquirt Newbie
Posts: 5
Joined: Mon Jul 27, 2009 2:10 pm

Re: Westfield SEiGHT

Post by adamnreeves »

Had the car rolling road tuned at Northampton Motor Sport yesterday. Made 280BHP power and 300LB-FT torque.

http://westfieldbuild.com/builddiary0910.htm#312
adamnreeves
MegaSquirt Newbie
Posts: 5
Joined: Mon Jul 27, 2009 2:10 pm

Re: Westfield SEiGHT

Post by adamnreeves »

Started up my car the other day, first time in these really low temperatures. Started up first time and quick as well. Infact I reckon it starts up better than my late model BMW 3 series!
julswesty
MegaSquirt Newbie
Posts: 1
Joined: Sat Feb 23, 2013 4:21 am

Re: Westfield SEiGHT

Post by julswesty »

Hi Adam,

I'm currently doing the same to my Westy V8, MS2 plus EDIS8. I've also been dipping in and out of your website detailing your build diary, I wish my road runner was of the same quality, do you still have yours ??

Can you help me out with a basis ignition map which I could try to get the car running before I make a trip to Northampton ?

Kind Regards ( fingers crossed )

Julian
Post Reply