Turbocharged A series

Post Reply
matnrach
MegaSquirt Newbie
Posts: 4
Joined: Sat Jul 08, 2006 10:11 pm

Turbocharged A series

Post by matnrach »

Engine is 1293cc with a hybrid T2 turbo.
Intake manifold is made from a Metro turbo and modified to fit a K series throttle body

Injectors are 470cc Bosch EV6.

MS1 V3 running HiRes10g code with Closed loop lambda and Boost control.
EDIS ignition
ECU is also controlling the Pace charge cooler pump and sidepod mounted cooler rad fan.

Coming soon is a big valve head, kent 266 cam (currently it runs the legacy of the previous N/A tune of a long duration 731) and more boost.
8 aug 003s.JPG
4 aug 007s.JPG
21july 008a.JPG
You do not have the required permissions to view the files attached to this post.
Philip Lochner
Helpful Squirter
Posts: 45
Joined: Thu Feb 16, 2006 5:18 am
Location: Centurion, South Africa

Re: Turbocharged A series

Post by Philip Lochner »

What car is this? Pic of the whole car?
Kind regards
Philip
My MS projects: viewtopic.php?t=20086
matnrach
MegaSquirt Newbie
Posts: 4
Joined: Sat Jul 08, 2006 10:11 pm

Re: Turbocharged A series

Post by matnrach »

The car is a 1981 Davrian MK8
newcamera 010a.JPG
You do not have the required permissions to view the files attached to this post.
arnold
MegaSquirt Newbie
Posts: 2
Joined: Sun May 16, 2004 12:08 pm
Contact:

Re: Turbocharged A series

Post by arnold »

hi there

looks very impressive. I have a few questions:

- how does the car run?
- why hi res code
- could you give more details on how / where the injectors are fitted in the inlet manfold
- do you run ign as well?
- can I have a glimpse on your fuel and sparktables?


I am running a Austin Healey Sprite wih an Eaton supercharger
MS1, MT2.25, extra code q2
http://kmnet.demon.co.uk/~arnold/
matnrach
MegaSquirt Newbie
Posts: 4
Joined: Sat Jul 08, 2006 10:11 pm

Re: Turbocharged A series

Post by matnrach »

Hi,
I am in the middle of an upgrade at the moment with larger ported head, new shorter duration cam, stronger clutch etc.
I will post more pics when I finish.

The car drives very well indeed without any hesitations but there has been many map changes and lots of iterations of transient fuelling due to the wall wetting of the inlet manifold.
The longer duration cam was a legacy of the original engine which causes the boost to arrive slightly later than I would like so I am changing it for a reduced overlap cam also with earlier inlet valve closing.

I use Hires code as I have large injectors and it has better control at low pulse widths.

The injectors are mounted in a modified K series throttle body
Image
This avoids the problem of chrage robbing associated with siamesed ported engines.

I built and mapped the engine before the latest sequential code which would mean that you could use two injectors per port.

I run wasted spark mapped ignition (from the MS box) with an EDIS module as well as closed loop fuel and boost control.
rogerntanner
MegaSquirt Newbie
Posts: 2
Joined: Fri May 29, 2009 8:35 am

Re: Turbocharged A series

Post by rogerntanner »

I am using a single throttle body on a 1977 MGB, which also has two injectors.

What is the diameter of your throttle body at the butterfly?

My cam is a 270 Deg Crane, sold by Moss for MGBs many years ago.
My throttle body is a fake Stromberg 97, used in threes on American V-8s with approximately 300 c.i.d.
Yes, I realize you have a smaller displacement than my 1.8L MGB.

Roger Tanner, Lompoc, CA
matnrach
MegaSquirt Newbie
Posts: 4
Joined: Sat Jul 08, 2006 10:11 pm

Re: Turbocharged A series

Post by matnrach »

rogerntanner wrote:I am using a single throttle body on a 1977 MGB, which also has two injectors.

What is the diameter of your throttle body at the butterfly?

My cam is a 270 Deg Crane, sold by Moss for MGBs many years ago.
My throttle body is a fake Stromberg 97, used in threes on American V-8s with approximately 300 c.i.d.
Yes, I realize you have a smaller displacement than my 1.8L MGB.

Roger Tanner, Lompoc, CA

My throttle is 48mm in diameter. The engine now gives around 165hp
Here is a pic of the engine currently
Image
All mods have now been done (head, cam etc)
Interestigly the engine needed completely remapping with the new cam, I guess the charge rejection especially at low speed was very different.
Post Reply