1988 FZR1000 MICROSQUIRT

pommie
MegaSquirt Newbie
Posts: 6
Joined: Tue Jul 08, 2008 6:45 pm

1988 FZR1000 MICROSQUIRT

Post by pommie » Tue Jul 08, 2008 6:55 pm

just a quick run down of my project

88 yamaha fzr 1000
gsxr750 throttle bodies
msd fuel pump
modified fuel tank
wide band 02
microsquirt
plenum chamber with side exit air intake.

the bike is running and rideable...next week its going on the dyno, and hoping for some good figures

jariw
MegaSquirt Newbie
Posts: 8
Joined: Tue Jan 15, 2008 11:18 pm

Re: 1988 FZR1000 MICROSQUIRT

Post by jariw » Tue Jul 08, 2008 10:13 pm

Congrats.... :yeah!:
How does it ride?

I am currious about pictures etc. etc. And specialy the msq file.

But why modified fuel tank (return line??)

Greetings
Jari

pommie
MegaSquirt Newbie
Posts: 6
Joined: Tue Jul 08, 2008 6:45 pm

Re: 1988 FZR1000 MICROSQUIRT

Post by pommie » Tue Jul 08, 2008 11:56 pm

the standard fuel tap wont flow enough fuel, so i had to drill two holes in the tank.
for fuel supply and return.
as for the msq....it wont be much good for you unless you are using the same injectors ect

jariw
MegaSquirt Newbie
Posts: 8
Joined: Tue Jan 15, 2008 11:18 pm

Re: 1988 FZR1000 MICROSQUIRT

Post by jariw » Wed Jul 09, 2008 12:22 am

Hello Pommie,..

I'am building a fz750 with a 1000 engine in it. Using gsx750 trhottle bodies and injectors. Only the fuel pump is different, i am using a gpz1100 pump.

How did you notice the standard tap isn't enough??

Greetz

Jari

pommie
MegaSquirt Newbie
Posts: 6
Joined: Tue Jul 08, 2008 6:45 pm

Re: 1988 FZR1000 MICROSQUIRT

Post by pommie » Wed Jul 09, 2008 12:58 am

the fuel pump overheated and burnt out.
if you want any more info....pm me

pommie
MegaSquirt Newbie
Posts: 6
Joined: Tue Jul 08, 2008 6:45 pm

Re: 1988 FZR1000 MICROSQUIRT

Post by pommie » Wed Jul 09, 2008 3:04 pm

DSCF1481.jpg
You do not have the required permissions to view the files attached to this post.

jariw
MegaSquirt Newbie
Posts: 8
Joined: Tue Jan 15, 2008 11:18 pm

Re: 1988 FZR1000 MICROSQUIRT

Post by jariw » Thu Jul 10, 2008 5:54 am

That is great...very GREAT. :lol: :lol: :lol: . This must give more power...

Very nice work

pommie
MegaSquirt Newbie
Posts: 6
Joined: Tue Jul 08, 2008 6:45 pm

Re: 1988 FZR1000 MICROSQUIRT

Post by pommie » Wed Sep 03, 2008 1:21 pm

monday log.msq
hopefully there should be a msq here...it might help some people trying to set up alpha n
You do not have the required permissions to view the files attached to this post.

zfr1000r6
MegaSquirt Newbie
Posts: 1
Joined: Wed Nov 26, 2008 7:29 am

Re: 1988 FZR1000 MICROSQUIRT

Post by zfr1000r6 » Thu Nov 27, 2008 8:21 am

Im trying to get the FI parts together for my 88 fzr 1000. Any help you could give me as far as what to look for and what fits the best would be greatly appreciated.

Wenderby
MegaSquirt Newbie
Posts: 1
Joined: Thu Oct 14, 2010 2:22 pm

Re: 1988 FZR1000 MICROSQUIRT

Post by Wenderby » Thu Oct 14, 2010 2:31 pm

Hi

did you use the original crank pos. sensor ?

best regards Casper from Denmark

Post Reply