T2GTUS - '89 Mazda RX7 Turbo 2

Post Reply
T2GTUS
MegaSquirt Newbie
Posts: 2
Joined: Thu Jun 16, 2005 10:27 am

T2GTUS - '89 Mazda RX7 Turbo 2

Post by T2GTUS » Fri Dec 22, 2006 10:27 am

Name: T2GTUS

Vehicle: 89/Mazda/RX7 GTUs now Turbo 2

Engine: 13B, Rotary, Street Port, N/A rotors, T4 turbo, FMIC, 3" exhaust.

Injection: Port, 850cc primary/1600cc secondary, Factory manifolds/sensors.

Description: Running on MS1 v2.2 board w/ error's daughtercard. Recently upgraded to 029W code. MS currently reading/controlling fuel/spark/idle/fuel pumps/fan/knock/egt/shiftlight/. Many thanks to the whole MS team, and muythaibxr for his direct help!

RobertNygård
MegaSquirt Newbie
Posts: 1
Joined: Thu Aug 13, 2009 12:26 pm

Re: T2GTUS - '89 Mazda RX7 Turbo 2

Post by RobertNygÃ¥rd » Thu Aug 13, 2009 12:39 pm

Hi
Have the same engine as you, and I'm thinking of install MS. You run everything through MS ? How do you trigg the MS ? (My car has electronic ignition) It has also black and red injectors - do you know the size of these ?
From Robert Nygård, Norway

T2GTUS
MegaSquirt Newbie
Posts: 2
Joined: Thu Jun 16, 2005 10:27 am

Re: T2GTUS - '89 Mazda RX7 Turbo 2

Post by T2GTUS » Wed Sep 09, 2009 3:43 pm

Everything is run on a MS2.2 board ... I trigger with the factory CAS ...

check out the following for some good info:

http://www.rx7club.com/showthread.php?t=658411

Black and red injectors ... sounds mixed I would guess the red might be s5 550's if they have the oval plug ... no clue on the black ...

Post Reply