Paul Tegler's FIS6 (physics) Triumph Spit6 Project
Paul Tegler's FIS6 (physics) Triumph Spit6 Project
Vehicle: 1975 Triumph Spit6
Engine: Custom homemade port injected manifold, crank fired wasted spark ignition running MS-I / v3 / MSnS-E / 029q2 / MT225
Description: The frame was cut to move everything back 6". Since GT6 springs jacked the front end up in the air, I had to put the stock 1500 Spit springs back on up front, as the engine weight is not hanging out over the front suspension like in a stcok Spit6 or GT6 setup. A 3-rail tranny shifter extension was used so it could be shortened to keep the lever in the stock position. The handling is truly phenomenal compared to my other stock Spits and/or my GT6.
Website: http://www.teglerizer.com/Spit6_update.html
http://www.teglerizer.com/triumphstuff/ ... light.html
My Success stories
viewtopic.php?p=138408#138408
viewtopic.php?f=84&t=22957
Home site: http://www.teglerizer.com/Injected_Spit6.htm