subaru with all stock sensors and stock 6/7 crank wheel
subaru with all stock sensors and stock 6/7 crank wheel
mods are:
full ECU swap to MS2/Extra (Subaru 6/7)
4bar map daddy
custom intake ported and polished with 1†longer runners, 2 fuel injectors per cylinder, ported and polished 1998 2.5 ltr heads, 255-ltr fuel pump, carbon fiber timing belt, 1994 2.2 ltr closed deck block with oil squirters, Eagle rods, JE Pistons, Copper head gasket, SCAT crank , UNORTHODOX RACING pulleys, HKS Remote oil filter, Front mount oil cooler, top mount intercooler. 4 to 2 to 1 full ss headder no up pipe, Turbochargers.com MHI TD06-20G big daddy turbo, Apexi turbo back wide mouth ss 80mm N1 exhaust system, HKS blow off valve, WEAPON-R intake, EXEDY clutch, SYMS 8lbs flywheel, 2000 subaru rs 5 speed with straight cut dog tooth gear set, SYMS racing shifter, Quaife Engineering front and rear LSD, SYMS group N full car bushing set, SYMS front and rear top strut brace, RalliTEK STi Full Sway Bar Kit, RalliTEK front and rear endlinks, Cusco Comp-S front and rear camber plates, 50mm groundcontrol Coilovers, Rotora 4pot Front and 2 pot rear brakes, SPARCO corsa Front seats, carbon fiber air bag covers, indigo reverse glow gauges, VeilSide carbon hood, front lip, side rockers, rear spats, PIAA lights, BFGoodrich g-Force T/A KD dry for street, Hoosier D.O.T. A6 for autocross, 5Zigen Wheels,
And best of all a full ECU swap to MS2/extra (subaru 6/7)
i will try to answer any questions i can about my build up of my ms2/extra
Special thanks to Matt and Justin at http://www.diyautotune.com and the ms/extra code writers that made this work
Re: subaru with all stock sensors and stock 6/7 crank wheel
Thank you for the encouraging success story,
Adam
Re: subaru with all stock sensors and stock 6/7 crank wheel
-
- MegaSquirt Newbie
- Posts: 1
- Joined: Thu Jul 09, 2009 7:43 am
Re: subaru with all stock sensors and stock 6/7 crank wheel
thanks
Mike
Re: subaru with all stock sensors and stock 6/7 crank wheel
I see the second spark output circuit and what appears to be a second VR conditioner in the Proto area, but what are the jumper wires on the MS2 daughterboard itself?
Also, can you share a msq file for those of us working on similar projects to reference?
thanks!
Re: subaru with all stock sensors and stock 6/7 crank wheel
Re: subaru with all stock sensors and stock 6/7 crank wheel
sorry its taking me so long to reply... i used low-impedance injectors and 2 batch fire injector drivers from matt at DIYautotune.. http://www.diyautotune.com/sime wrote:hi ,did you use a peak and hold board for yours injectors ?
again im sorry for taking so long to respond... i only have one coil driver to fire my coil wasted spark... i think maybe what you are seeing is another injector driver... i used 2 to batch fire my 2 sets of 4 for staged injection.... i do have another VR conditioner in the proto area to pick up the VR cam sensor for the subaru 6/7 code ... the extra wires on the MegaSquirt-II daughterboard are to make the ms2extra code work... i will up load my curent tune config file.. but i am havign some trouble tuning the AFR right now so i dont know if i would use my VE tablesSafir wrote:Looking at your MS board I have a few questions - working on a similar project myself...
I see the second spark output circuit and what appears to be a second VR conditioner in the Proto area, but what are the jumper wires on the MS2 daughterboard itself?
Also, can you share a msq file for those of us working on similar projects to reference?
thanks!
again mike is sorry for not responding quicker here is my tune file i am having a little trouble with my AFR right now but i hope to have it fixed soon...fujative06 wrote: this is also a great find for me to because i have a ej22t and a 96 dohc 2.5 that i have started to build mildly and on a budget and just recently found out about megasquirt. i was wondering if you had any base maps that you started out with i realize you have a 20g and i plan on running the stock turbo but i think it would help me work a few things out.
thanks
Mike
-
- MegaSquirt Newbie
- Posts: 1
- Joined: Mon Jun 07, 2010 10:21 am
Re: subaru with all stock sensors and stock 6/7 crank wheel
Hi, saw this and it caught my attention. Maybe I've missed it in the documentation I've been reading, can you point me to where this is spelled out so I can understand what's going on here?suberacer wrote:the extra wires on the MegaSquirt-II daughterboard are to make the ms2extra code work
Thanks!!