62 Ford Falcon with 331 Stroker - MS2 V3 EDIS8

Ford, Lincoln, Mercury, Merkur, etc.
Jon Richard
MegaSquirt Newbie
Posts: 1
Joined: Thu Mar 24, 2016 7:00 am

Re: 62 Ford Falcon with 331 Stroker - MS2 V3 EDIS8

Post by Jon Richard » Thu Mar 24, 2016 12:36 pm

I'm building a '62 Falcon with a 331 scat kit in a 5.0 block as well. I'll be curious as to how you tackle the crank trigger as I assume you're also stuck with a 28oz imbalance to work with.

Subscribed for when you get to installing EDIS.

patrickbrown
MegaSquirt Newbie
Posts: 11
Joined: Sun Feb 15, 2009 4:39 pm

Re: 62 Ford Falcon with 331 Stroker - MS2 V3 EDIS8

Post by patrickbrown » Thu Dec 21, 2017 10:06 pm

I do have EDIS on this car now. It's been there a while. I built a custom coil bracket that sits just above where the distributor would be. I run a billet aluminum crank pulley with a spacer between the balancer and the pulley. I mounted the spacer on a lathe and turned it down enough to sandwich a steel toothed wheel in between. I then fabricated a bracket to mound the sensor. I'll try to get some photos posted soon.

I'm in the process of converting to MS3x. I'll be pulling the right side fender and rerouting the cable. I've never like the look of the exposed wire bundle.

Post Reply