Jesse N., 1986 Chevy Monte Carlo SS
Posted: Sun May 28, 2006 11:04 pm
Name: Jesse N.
Vehicle: 1986 Chevy Monte Carlo SS
Engine: +5.7L, 355ci Chevy Smallblock, modified Intake-Ignition-Exhaust (the whole nine yards basically...)
Injection: Soon-to-be port injection via modified Weiand tunnel ram. Using MSnS-E & V3 Board
Description: She's pretty quick, but it is time to put a little 21st century technology into a 20th century car.
Website: None (yet...)
Quick Synopsis:
Weiand Tunnel Ram w/ modified injector bungs welded in
- Soon to have NO2 injector plates fitted between upper and lower
halves of intake
(x2) Autonomics throttle bodies (one fitted with TPS)
Ross Machine Fuel Rails
Aeromotive EFI Regulator
MSD Pro-Billet distributor (Non-HEI)
MSD 6AL (soon to be integrated into MSnS-e MSEFI)
Lokar throttle/trans cables & misc Stainless Steel linkages
Summit Racing Street Scoop modified for true ram air (pressurized
induction at speed)
ETA: July 4th, 2006 (which, coincidentally, is the same date that I installed the nitrous motor into it last year...starting to see a trend...)
Vehicle: 1986 Chevy Monte Carlo SS
Engine: +5.7L, 355ci Chevy Smallblock, modified Intake-Ignition-Exhaust (the whole nine yards basically...)
Injection: Soon-to-be port injection via modified Weiand tunnel ram. Using MSnS-E & V3 Board
Description: She's pretty quick, but it is time to put a little 21st century technology into a 20th century car.
Website: None (yet...)
Quick Synopsis:
Weiand Tunnel Ram w/ modified injector bungs welded in
- Soon to have NO2 injector plates fitted between upper and lower
halves of intake
(x2) Autonomics throttle bodies (one fitted with TPS)
Ross Machine Fuel Rails
Aeromotive EFI Regulator
MSD Pro-Billet distributor (Non-HEI)
MSD 6AL (soon to be integrated into MSnS-e MSEFI)
Lokar throttle/trans cables & misc Stainless Steel linkages
Summit Racing Street Scoop modified for true ram air (pressurized
induction at speed)
ETA: July 4th, 2006 (which, coincidentally, is the same date that I installed the nitrous motor into it last year...starting to see a trend...)
