golf vr6 2.8 aaa coilpack n/a and turbo msq
golf vr6 2.8 aaa coilpack n/a and turbo msq
ms1 v3 (029y4)
n/a
stock compresion
36lb injectors
techedge linear wideband
3xvb921 direct drive (stock amp removed)
stock 4bar fuel reg
same as above but fitted with a t04e t4 turbo and .84 hotside apt manifold and 3in downpipe running 8psi of boost threw a large intercooler
i will upload my another one when i get my headspacer fitted and walbro 255lph fuel pump running @ 1 bar
Re: golf vr6 2.8 aaa coilpack n/a and turbo msq
Right now I am running a pre-programmed C2 42lb Injector setup. I am rebuilding the block and I'm going to use that tune to break it in for the first few 1k miles and then once the engine is properly broken in I should have the harness built up and I can just swap it in. I'll swap in a low lb spring for the wastegate and get it tuned again for the 42lb setup. Hopefully it shouldn't take to long to get the parameters in.
This is my first MS setup that I've ever done so it's going to be fun I think. I'm doing all the research for all the mods I need to do to the MS board right now in my free time. Hopefully my write up will encourge more people to go to MS instead of using the pre-programmed 30, 36, and 42lb setups that are made for the MK3 VR6's right now.
Soon : 1986 Scirocco VR6
RIP : 1987 Jetta GL
RIP : 1986 Jetta Coupe
Re: golf vr6 2.8 aaa coilpack n/a and turbo msq
Re: golf vr6 2.8 aaa coilpack n/a and turbo msq
here is a few screen shots as requested in pm hope they work
Re: golf vr6 2.8 aaa coilpack n/a and turbo msq
Thanks for the screen shots!!
Re: golf vr6 2.8 aaa coilpack n/a and turbo msq
Re: golf vr6 2.8 aaa coilpack n/a and turbo msq
altered my required fuel to suit my injectors then she started first time