1995 GTI VR6 N/A
Re: 1995 GTI VR6 N/A
If you want info on a pre-configured setup shoot an email to kandpperformance@gmail.com
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com
Re: 1995 GTI VR6 N/A
![Smile :)](./images/smilies/icon_smile.gif)
Re: 1995 GTI VR6 N/A
![Cool 8)](./images/smilies/icon_cool.gif)
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com
-
- MegaSquirt Newbie
- Posts: 13
- Joined: Fri Apr 11, 2008 5:28 pm
Re: 1995 GTI VR6 N/A
![Image](http://kptuned.files.wordpress.com/2008/07/kpt_boti-2008_1.jpg)
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com
Re: 1995 GTI VR6 N/A
I'm using an obd2 aba tb and they are the same as obd2 vr6 ones from what i've learned, and i can't get the idle valve motor to close the throttle plate enough to idle below 1200.
Did you modify your obd2 tb?
-
- MegaSquirt Newbie
- Posts: 13
- Joined: Fri Apr 11, 2008 5:28 pm
Re: 1995 GTI VR6 N/A
have you tried adjusting timing and fueling to get the idle rpm lower?hsbr wrote:What is the idle valve your using from?
I'm using an obd2 aba tb and they are the same as obd2 vr6 ones from what i've learned, and i can't get the idle valve motor to close the throttle plate enough to idle below 1200.
Did you modify your obd2 tb?
Re: 1995 GTI VR6 N/A
In order to drop rpm's would i lean out the bins its in and remove some advance?
Re: 1995 GTI VR6 N/A
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com
Re: 1995 GTI VR6 N/A
But if anyone figures out how to just open up the throttle body in a controlled manner then i'll be ready, cuz i've heard that you need to reverse the polarity to get the tb to close more then it sits standard.