Rover V8 4.6
Posted: Sun Oct 04, 2009 3:53 am
Another success story for Megasquirt.
Running a Cross Bolted 2005 Block 4.6Litre in a Westfield. Megasquirt I PCB version 3.0 running MSextra 29y3. EDIS8 ignition module and coil packs. Trigger wheel and sensor from Trigger Wheels.
I made up the ECU myself. Got a base map from someone running a Rover V8. Set mixture quite rich and she started first time!
I have just come back from Northampton Motor Sport where Troy done a complete mapping. Managed to get 280BHP and 300 lb-ft. Maximum power was interrupted by the rev limiter set at 5800.
You want more details of my build, etc then visit http://www.westfieldbuild.com/
Running a Cross Bolted 2005 Block 4.6Litre in a Westfield. Megasquirt I PCB version 3.0 running MSextra 29y3. EDIS8 ignition module and coil packs. Trigger wheel and sensor from Trigger Wheels.
I made up the ECU myself. Got a base map from someone running a Rover V8. Set mixture quite rich and she started first time!
I have just come back from Northampton Motor Sport where Troy done a complete mapping. Managed to get 280BHP and 300 lb-ft. Maximum power was interrupted by the rev limiter set at 5800.
You want more details of my build, etc then visit http://www.westfieldbuild.com/