Plug and Play Lucas 4CU conversion
Plug and Play Lucas 4CU conversion
I've duplicated the DB37 on the case, as well as a D9 for the serial connection and a 4 way power for a wideband sensor unit.
The only mod to the MS was the fabrication of a larger heatsink which doubles as a mounting bracket at one side. Although upwards pointing D connectors would have made things easier than the standard 90 degree ones.
It retains the flapper AFM - but all that is actually used in it is the ATS. So the flappers could be removed to improve air flow.
My own Rover SD1 which uses this system has been modified for EDIS as well as MS, so I've not been able to fully test my 'plug and play' conversion - but it seems ok on my spare complete inlet manifold in the workshop.
-
- MegaSquirt Newbie
- Posts: 13
- Joined: Fri Aug 20, 2004 3:25 pm
- Location: Australia
- Contact:
Re: Plug and Play Lucas 4CU conversion
Cheers
Rick
-2004 Opel Corsa C / Holden Barina Z18XE - > MS1 Extra n Spark (60-2 Wheel)
-1976 Triumph Dolomite Sprint Race Car -> MS1 n 'EDIS'd
-1984 C1 2.3 Alpina -> MS2 Extra n Spark (60-2 Wheel)