www.MSruns.com read only forum (Jan.15,2018)

hmm...

Here are 2 pictures of the throttle linkage.

Here's a pic of the aircleaner and new thermostat housing. I made a housing and gave it two 3/8 npt holes for the temp sensors for the ecu and gage. I like having them there and not on the manifold. making a new unit also allowed me to machine an o-ring groove to avoid using a gasket, it's very nice...

Dyno results! Here's the dyno test overlayed with an previous run with a single plane intake and 850 carb. It's the same dyno and the car is the same except for the induction system and compression which I lowered by .8 during the installation. The dyno run shows some missing that I have to diagnose...

Yes, that's for crankcase ventilation. This car sees alot of track time, nothing generates oil coming out of everywhere like sustained full throttle blowby. The previous setup had a crossover tube between the valve covers along the firewall which worked well but didn't fit the throttle bodies. There...

Name : Mike Simard Vehicle : Superformance Cobra Engine : 427cid Ford 351w based engine. Dart aluminum block, 4.125 bore 4” stroke. 10.5:1, AFR205 heads Injection : Individual 56mm throttle bodies. 50lb Delphi injectors. MSII v3.0 with EDIS ignition. Description : This has been a 6 month project,...