volvo 122 megasquirt wiring
-
- MegaSquirt Newbie
- Posts: 1
- Joined: Fri Oct 08, 2010 10:55 am
volvo 122 megasquirt wiring
I'm using the stock D jet intake, and I made a fuel rail.
I'm in the process of building my wire harness, and I'm at the fast idle portion now. So in the megasquirt maual it says to wire in an aux. air valve.
But on the D jet system it has an air valve bolted directly to the head and is tapped into the coolant water jacket. It opens and closes depending on coolant temp. Can I use the stock air valve and skip wiring in an aux. air valve.
will the on board map sensor know when my air valve is opening and richen the mixture without any wires hooked up to any valve.
thanks you guys
Re: volvo 122 megasquirt wiring
You're more likely to get help with the question by posting it at MSEFI.com.
viewtopic.php?f=100&t=22798