Phil's MS3/MS3X 97 Audi A4 AEB 2.0T

Post Reply
pac1085
MegaSquirt Newbie
Posts: 3
Joined: Tue Mar 20, 2007 10:11 am

Phil's MS3/MS3X 97 Audi A4 AEB 2.0T

Post by pac1085 »

V3.0 PCB with MS3 and MS3X

-Running fully sequential fuel and spark using stock 60-2 (vr) and cam (hall) sensors
-1400cc high impedance injectors with 2.5bar base pressure. http://www.fiveomotorsport.com/black-op ... -euro-long
-Ignition through p/n 06h 905 115A TSI COPs off of MS3x spark outputs with external 5v pnp driver box.
-Boost control using a MAC solenoid.
-Stock cluster in tacho working with MS3X JP3 connected. Running a 1k resistor inline to pin 6 on the stock ECU connector.

Holset H1C 56mm Turbo

All of this through a plug-n-play harness which I created using the connector off an OEM ECU (cannibalized it from a dead ECU, anyone know where I can buy a new connector?)

MSQ is attached.
You do not have the required permissions to view the files attached to this post.
Last edited by pac1085 on Sat Jan 16, 2016 12:01 pm, edited 5 times in total.
pac1085
MegaSquirt Newbie
Posts: 3
Joined: Tue Mar 20, 2007 10:11 am

Post by pac1085 »

Some updates...

I installed a MS-II processor and am running the latest MS2/Extra code (currently beta 21)

The delphi 75's are no good for such a small engine, I'd suggest another type of injector. I went with Siemens 630cc which work perfect.

I'm also running the car on E-85 now.
MateusPauli
MegaSquirt Newbie
Posts: 1
Joined: Thu Aug 09, 2012 6:00 pm

Re: Phil's 97 Audi A4 1.8T

Post by MateusPauli »

Hi Phil´s !

Nice project ! I liked the size of turbo... How many HP and how many pressure runs on it ?

I am from Brazil and I am new here.
I have a Audi A3 1.8T 1997, and my engine seens your engine, I think the only difference is 4 coils on pen.
I Installed a MS2 with extras, but i dont have sufficient know-how to tunning yet... :-( I am studyng hard.

Please, could you share your msq file to start my tunning ?

Thank you

Mateus
pac1085
MegaSquirt Newbie
Posts: 3
Joined: Tue Mar 20, 2007 10:11 am

Re: Phil's MS3/MS3X 97 Audi A4 1.8T

Post by pac1085 »

Updated the first post. Quite a few things changed. Now running on MS3/MS3X.
Saksofoni
MegaSquirt Newbie
Posts: 1
Joined: Tue Jun 16, 2015 8:45 am

Re: Phil's MS3/MS3X 97 Audi A4 AEB 2.0T

Post by Saksofoni »

Hey!

Could you help me with the plug n' play harness?

I have the OEM ECU connector but I need some information how to wire the OEM connector to MS?

I'm going to run MS3/MS3X on AEB engine with TSI coils, E85 and flexifuel sensor.

And what would be the easiest way to get the car idle with MS?

Thank you!
doubas
MegaSquirt Newbie
Posts: 1
Joined: Sat Feb 18, 2017 1:46 am

Re: Phil's MS3/MS3X 97 Audi A4 AEB 2.0T

Post by doubas »

although it is an old thread but am doing the same!!! thanks
Post Reply