1987 Buick Turbo T Limited
Posted: Tue Dec 18, 2007 5:42 pm
Built a MS1 with a V2.2 board and used MSnS 029y3 in the processor. Basically a stock car, I made a plug n play harness and didn't have to change a single wire under the hood. I've not gotten the fan control to work correctly yet, runs all the time (better than not at all) so I'm studying that to see what I've gotten wrong. Using an Innovate LM-1 fed in the O2 sensor to tune with.
I'm going to build a V3 board and try MSII for more options. I really want to put COP on it.
Many Thanks to Bruce and Al for providing a real do it yourself project. Also Thanks to "Wop on tour" for his information on the GM dis ignition systems.
Mark Riley
Greensboro, NC
I'm going to build a V3 board and try MSII for more options. I really want to put COP on it.
Many Thanks to Bruce and Al for providing a real do it yourself project. Also Thanks to "Wop on tour" for his information on the GM dis ignition systems.
Mark Riley
Greensboro, NC