Federico Sabatino, Chevrolet Corsa turbo 1.6 8v

[c_turbo]

Hi, here is my succes story.

The car is a chevrolet corsa 4 cyl 1.6l 8v with forged pistons, forged connecting rods, a modify cam, intecooler and oil cooler. The cr is 7.5:1
The turbo is a Garrett T3/T4 journal bearing at the time boosting 5psi because I'm runing the OEM fuel injectors (160 cc/min).

Im using a MS-I v3.0 MSnS-E with the stock VR sensor and wheel decoder.
Its a wasted spark with 2 VB921.

I will get news when it run seriusly boost.

Pic of the car



Regards

PD: Thanks B&G!!

[Toehead]

That is one mean looking intercooler!


Clean install, I like it.

[nx-]

Hello,

I'm trying to run the exact same car with MS, Can you post your .MSQ file.?

Doy you have any wiring diagram or tip especially the VR part.

The only diference is that I'm using 240 cc injectors from a LT1 Camaro and this car is called Chevrolet Chevy C2 in Mexico.

Also I chipped the car for this injectors wiht 8 psi of boost but I lost resolution when changing to 2.5 bar, so I'm trying MS now.

Nice car you have.

Saludos

[nyabinghi]

Nice projetc!!
Have you got pics of the engine bay please ?
Thanks